About Shingle Calculator
ShingleCalculator.net is a free tool for working out how many shingles, bundles and accessories a roof needs. It's built to answer one question well: what exactly should I order?
Who builds this site
Technical reviewer
How the calculator works
Every number is calculated in your browser using these formulas. Nothing you type is sent to us.
| Output | Formula |
|---|---|
| Roof area | Σ (length × width × √(1 + (rise ÷ 12)²)) |
| Squares | roof area ÷ 100 |
| Shingle bundles | ⌈ squares × (1 + waste %) × bundles per square ⌉ |
| Starter bundles | ⌈ (eaves + rakes if selected) × 1.05 ÷ ft per bundle ⌉ |
| Ridge cap bundles | ⌈ (ridges + hips) × 1.05 ÷ ft per bundle ⌉ |
| Underlayment rolls | ⌈ roof area × 1.10 ÷ roll coverage ⌉ |
| Drip edge pieces | ⌈ (eaves + rakes) × 1.10 ÷ 10 ft ⌉ |
The pitch math is exact geometry. The default coverage values come from real products: ridge cap from GAF Seal-A-Ridge (25 ft per bundle), starter from the low end of GAF, Owens Corning and CertainTeed starter products (100 to 120 ft), and underlayment from GAF Tiger Paw and standard #15 and #30 felt rolls. The waste factors follow Owens Corning's 10% to 15% guidance, with 20% for complex roofs. You can change all of them in the calculator to match your product. These defaults were last checked against published manufacturer data on November 15, 2026.
Editorial standards
- No invented numbers. We don't publish price estimates we can't back up. The calculator totals cost only from prices you enter.
- Sources. Product facts are checked against manufacturer spec sheets and installation instructions. Code facts are checked against the International Residential Code and local amendments. Each page lists its own sources at the bottom. The main ones are:
- Building code: International Residential Code chapter 9 (R905 roof coverings and minimum slopes, R905.1.2 ice barriers, R908 reroofing), as published by state and local building departments.
- GAF: data sheets and instructions for Timberline HDZ, Timberline AS II, Royal Sovereign, Pro-Start, WeatherBlocker, Seal-A-Ridge, TimberTex and Tiger Paw; technical bulletins R-141 (drip edge) and R-152 (cool weather installation); GAF's low-slope and impact-resistance guidance.
- Owens Corning: data sheets for TruDefinition Duration, Duration MAX, Duration Premium, Supreme and Starter Strip Plus; the Owens Corning DIY roofing guide.
- CertainTeed: technical data sheets for Landmark, Landmark PRO and SwiftStart.
- Grace (now CertainTeed Vycor): Ice & Water Shield product data sheet.
- Industry references: InterNACHI Standard Estimated Life Expectancy Chart; NRCA roofing glossary; OSHA 29 CFR 1926.500; JLC Field Guide to asphalt shingles; Fine Homebuilding.
- Updates. Each page shows the date it was last reviewed.
- Corrections. Found an error? Tell us below and we'll fix it and note the change.
Contact
Questions, corrections or suggestions for a new calculator? Email contactus@shinglecalculator.net. We read every message. If you've spotted an error, include the page and what looks wrong, and we'll check it and fix it.